Effie Dudley Table Lamp November 04th, 2018 - 16:40:24
The sticks lamp, edges in cardboard and glue the tips so not about nothing out of tips. Making an angle of 90 degrees continue, making up to end all sticks. After doing various sticks, couples put a hot glue drop in every point stick a drop on top and a drop down and paste another pair of sticks, making a perfect square. remembering to align and tighten and firm. The glue to hold remember that sticks parallel must always be in the same height.
If a stick is up, your parallel must also up continue, making a square to end all sticks. Now, let's glue them, let your hot glue very hot, then quickly. Put 4 drops one in each point and then put a square in the other up along with perfectly and the speed of light turn lightly. The square for the lamp stay with fashion spiral and the hot glue has not dried before you turn. The sticks. Remember that the sticks must respect your heights, always leave sides with sticks. The same heights after completing your lamp must look like this.
Take your piece of cardboard and with scissors, make an opening to pass the cable do not cut the square all. Let one part without cutting pass hot glue on sticks in the base and paste the cardboard it, but rather sure, to measure to see if the board fits perfectly pass. The plug by the hole and start to put all the lights inside does not push much the lights.
Copyright © 2019 marcosvillatoro.com. Reproduction without explicit permission is prohibited. All Rights Reserved.
User Agreement, Privacy, Cookies. Wooden Floor Lamps 8 inch wall clock bathroom vanity solar string lights best soap dispenser best toilet seat rocking chair square tablecloth bathroom sinks linen tablecloth outdoor decoration accent chair.